Improvement For All

Month: August 2022

The Importance of Pool Table Services

If you want to keep your pool table in pristine condition, you should hire a professional service for this job. There are many disadvantages to moving heavy items, so hiring a professional service is a must. The billiards store Raleigh NC can take care of the entire process and let you sit back and relax while they do the heavy lifting. The pros also know the correct method for disassembling the table and re-felting its rubber cushions.


Disassembly of pool tables requires essential tools and knowledge of how to disassemble the pool table. Make sure you have eye protection and extra hands to help you. The legs are the easiest part to remove. Be sure to mark them and wrap them up for transportation. Then, please take out the slates and place them in a box. You can now disassemble the rest of the pool table.

Before you start disassembling the pool table, mark the parts meant to be transported. Wrapping the pool table correctly will help keep the pieces from tearing apart during transport. After that, load it into a truck and have it reassembled. If you’re moving to a new home, you don’t need to disassemble the pool table. Instead, you can hire a professional service to take care of the job.


Re-felting a pool table requires precision and skill. Professionals use tools designed for this job to ensure that the table is level and the felt is attached properly. The most challenging part of the process is stretching the felt and attaching it securely. In addition, the felt must be smooth and wrinkle-free. To begin, remove all rails and unscrew any screws or bolts that hold them. Next, remove any old felt or glue from the table surface.

Re-felting a pool table can cost anywhere from $125 to $280 an hour, depending on the size and type of pool table. Most tables are eight feet long, so the cost for this service increases accordingly. Also, consider the cost of adding bumpers, which will add $60 to $180. Re-felting services can be done together with bumper replacement. You can save money by doing both tasks at once if you have more than one pool table.


If you are looking for a reliable company to clean your pool table, you should consider using a professional service. A vacuum attachment with a strong suction power will help you remove all debris, but be sure not to use it on the playing surface. It could cause damage to the felt and will leave wrinkles. It is best to use a handheld vacuum attachment instead. Be sure to avoid the attachment’s hard edges and not use a brush with spinning parts.

You should also learn how to clean a pool table yourself. There are many tips and tricks for cleaning a pool table that will make the process easier and more convenient. The first step is to wipe any visible dirt and spills with a cloth. Regular household wood cleaners can be used on the cabinet and rails but do not use on leather. Then, you can wipe off the surface with a clean cloth.

Rubber cushions

Changing the rail cushions on a pool table can be a tricky endeavor. Not only should you know the correct shape of your rails, but you should also know the different profiles of pool table rail cushions. The correct profile is based on the height of the pool table and how the ball will make contact with the rail. 

Unlike the spongy surfaces of a pool table, rubber cushions have more impact on the game. They bounce pool balls and retain their kinetic energy. These pool table accessories can last anywhere from twenty to twenty-five years. But some types of pool tables require replacement cushions sooner than others. Then it is time to start investing in your pool table! 


Professional moving services are vital to ensuring the safety of your pool table. Billiard tables are typically made of slate and covered with felt, making them a substantial object to handle. In addition, moving the table yourself can cause structural damage and require specialized tools and techniques. Pool table services offer the necessary tools and experience to ensure the safety of your investment. They also provide free quotes for moving your pool table. 

A professional company can move and reassemble a pool table without damaging it. They have the manpower and insurance to deal with damages that might occur during the move. Because pool tables are so heavy, moving them yourself can be tricky. One misstep could ruin your investment. So, entrusting your pool table’s safety to the professionals is much easier.


If you’ve purchased a pool table, the next question is how to move it. There are many services available to move pool tables, but the cost of these services can be a bit expensive. The distance and logistics of moving your pool table will determine the cost. A simple in-house move is usually the cheapest option, but you may have to pay more for stairs and fuel. If you’re moving your pool table to a storage facility, you may have to pay extra for fuel and tolls. Moving it across town or to a storage facility will determine the cost. You can also disassemble your pool table and transport it yourself with a crate. Remember that distance and weight will be the biggest factors in the overall cost.

In some cases, pool tables may need repair and re-felting. A full-service call will cost almost $100. You can also get your pool table leveled for a few hundred dollars, depending on the type of felt. If you’re considering having a pool table re-felted, you can expect to pay anywhere from $300 to $520. But if you’re moving into a new place and want to avoid the hassle of trying to assemble the table yourself, consider buying a new one.

Interesting Facts About Commercial Water Heaters

There are important facts about commercial water heaters. These include size, energy efficiency, and costs. Read on and visit commercial water heaters in Pleasanton CA to learn more! After reading this article, you’ll be better equipped to choose the right commercial water heater for your business. We’ll cover all the facts you need to know. And don’t forget to ask questions about your needs. Ultimately, you’ll be glad you took the time to read this article!


Most people don’t know much about commercial water heaters. They use hot water for residential purposes. But there’s a whole industry of these appliances that you might not know. Until the invention of tankless water heaters in 1929, most water heaters were made by one company. Tankless models are still not the most eco-friendly despite their many benefits.

Commercial water heaters heat large volumes of water quickly. Fast heating rates are essential for commercial water heaters because they don’t want to disrupt business operations. Most of these heaters can last anywhere from 10 to 12 years. Compared to a residential tank water heater, a commercial tankless unit can last up to 18 years. And because commercial water heaters use so much energy, they are necessary for your business.

Energy Efficiency

The Department of Energy recently proposed new rules for commercial water heaters. The standards would mandate a new type of condensation technology. They would also require the use of less energy and reduce greenhouse gas emissions. The new measures would go into effect in 2026. Businesses could save as much as $140 million annually if they adopt these new technologies. In addition, this would mean that certain inefficient natural gas water heaters would be eliminated from the market.

Commercial water heaters should meet the Department of Energy’s First Hour Rating (FHR), which measures their initial efficiency. This test begins at three gallons per minute and is discontinued once the hot water outlet temperature falls to 15degF. The First Hour Rating is supplied by the Air-Conditioning, Heating, and Refrigeration Institute (ASHRAE) and Bradford White, subject to continuous improvement.


The price of a water heater varies widely, depending on its size and type. A typical thirty to the fifty-gallon unit will cost anywhere from $500 to $1,800. Permits and carpentry work add another fifty to sixty dollars. Expanding tanks are also an additional cost; they typically require an additional $400 to $500. The following price ranges are general estimates and don’t include transportation and installation.

Storage-type water heaters are typically sized according to water demand per fixture or capita. This method is most appropriate for light commercial facilities. The ASHRAE Handbook for HVAC Applications provides suggested capacity profiles. These profiles help choose a storage tank size and recovery rate. However, you should always consider the capacity of your business before selecting a commercial water heater. You’ll incur excess long-term operating costs and capital expenses if you don’t.


The size of a commercial water heater is an important consideration. Too large or too small will not only result in a higher water bill but will also result in running out of hot water at some point. In addition, it will put additional strain on the unit and reduce its lifespan. Therefore, it is essential to choose the right size for your application. To determine the correct size of a commercial water heater, consider the following factors.

First, you need to know the peak demand for hot water. Typically, storage-type water heaters are sized based on the amount required per fixture and capita. This method is most common for light commercial facilities. This method allows you to choose the correct storage tank size and recovery rate. However, it would help if you considered special considerations like the number of people living in your building. In addition to considering the number of people, you need to know how much hot water is used daily.


Proper maintenance of your commercial water heater is essential, whether you run a small office or a large office building. Whether your water heater is old and prone to leaks, it is vital to have regular maintenance to avoid costly repairs. Follow these maintenance tips to keep your commercial water heater running at peak efficiency. A checklist of essential maintenance tasks can help ensure that your commercial water heater is in good working condition. Make sure to follow these guidelines to ensure safe maintenance.

The first step in performing water heater maintenance is removing any sediment collected in the tank. The sediment can negatively affect the efficiency of energy spent heating water. If the deposit is left on the tank, it can affect energy efficiency. Remove residue and clean it out periodically with a hose to avoid this. If sediment is clogged, contact a professional plumber for help. Otherwise, hire a water heater repair company to perform your maintenance.

Maintenance Tips For Soapstone Countertops

You’re in the right place if you’re wondering how to clean a soapstone countertop. Soapstone is the common name for steatite, a magnesium-rich metamorphic rock with a high percentage of talcum or talc, the same substance pulverized to make baby powder. As a result, soapstone countertops Wheeling, WV are almost highly resistant to stains. It is in stark contrast to granite and marble, which are easily stained. Here are some maintenance tips for your soapstone countertop:


If you’re having trouble keeping your soapstone countertop looking as shiny as it did when you first installed it, sanding it may be your best option. You can sand it off if you’ve made mistakes to get a smooth surface again. However, sandpaper should be made of a soft material, such as polyester, to be gentle on the stone. This method may cause asbestos exposure if you’re not careful.

Start by removing the loose glue from the stone. You can do this by sanding off the area with a razor blade and hitting it with a pad ranging from 200 to 800 grit. If you’re removing swirl marks, you can also use a random orbital sander. The best method depends on the condition of the rest of the stone. Use a clean and dry towel to wipe the area after sanding.


If you have a soapstone countertop, you may want to re-oil it at some point. However, the first step is to remove the old oil from your soapstone countertop. To do this, use a wet sponge to wipe it down. Once the surface is dry, you can apply mineral oil. You can also use a small paintbrush to get into tight corners. Finally, to prevent oil from sinking into the stone, you can use a small paintbrush to apply it to the surface.

To re-oil a soapstone countertop, you need to apply mineral oil to the surface of the surface. You can purchase mineral oil at a hardware store. Once you’ve bought mineral oil, rub it onto the entire surface of your soapstone countertop. If you don’t have a rag, you can use a small paintbrush to get into the corners. Then leave it on for about 30 minutes. It will speed up the oxidation process.

Avoiding Bleach

Cleaning soapstone countertops is relatively easy. Its natural non-porous nature repels most stains and is heat-resistant. However, soapstone is not as hard-wearing as other stones, making it susceptible to scratches, stains, and mineral oil. If you have a soapstone countertop, clean it with a mild cleaner.

If you don’t know what to use, a good tip for cleaning soapstone countertops is to use diluted lemon juice or vinegar to clean them. However, it is recommended to avoid using bleach because it is a chemical that can damage your natural stone countertops. To avoid damage, you should use ultra-fine sandpaper to avoid bad scratches. Also, hot pots should never be placed directly on soapstone countertops.

Avoiding Ammonia

To maintain the appearance of your soapstone countertops, you should always avoid using harsh scrubbing products. Although soapstone is fairly stain resistant, it can be easily damaged by abrasives or tools that are too harsh. You should also avoid using household cleaning solutions with harsh chemicals in the kitchen because any residual chemicals may come into contact with food. Instead, to clean soapstone countertops, use only a mild pH-neutral detergent and mineral oil once a month.

You can find specialized cleaners for cleaning quartz at home improvement stores and online. While glass cleaners can sometimes clean quartz surfaces, you should check with the manufacturer to ensure that it is safe for your countertops. Also, remember that ammonia can etch and dull the stone’s surface. If you use a glass cleaner, make sure to use a non-ammonia-based one to prevent damage.

Powered by WordPress & Theme by Anders Norén