Improvement For All

Category: Equipment & Tools

Save Money With Solar

Whether you are thinking of building a new house or you are just tired of paying the electric bill in your current home, going solar can be a great way to save on energy costs. Here are some of the ways a homeowner saves money when going solar.

Save Money on Electric Bills

Nearly everybody pays a monthly electric bill. If you are on an equal pay type of plan, you know the average monthly cost for using that energy. If you are on a month-to-month type of bill, you can add up the past 12 months’ worth of bills and take the average. It all adds up! If you could save on this monthly cost, wouldn’t that help your overall budget?

When you go solar, you can decide what percentage of your energy you want to cover with the solar system you install. Some people go with an expected 100% coverage plan, while others don’t have enough roof or don’t have the money for a full initial outlay. However, even if you go at a 70% coverage rate, you’ll drastically reduce the amount you pay to the electric company each month.

Get a Tax Credit

The federal government offers an investment tax credit to homeowners who go solar. You will want to check out the solar ITC New Jersey to help you figure out the actual cost of solar in your area. You may have other state or local incentives that help bring down the overall cost to purchase and install the panels.

Lock in Electricity Prices

When you go solar, you work with your electric company to get the right kind of meters installed. They also set a specific rate that you will pay to buy any electricity that you need over and above what your system is producing. Locking in the rate when you get solar energy can save you over the long run because utility rates continue to increase each year.

Get a Great ROI

Even if you feel the price of the panels and installation is steep, do the math. Figure the cost of your electricity over the course of seven years or so and it will likely equate to the same amount you will pay for your system. However, once you have paid off your system, your power is practically free! Solar energy systems are often guaranteed for 25 years or more, so you can see that you will save money in the long run.

If you want to save money on your electricity costs, you should consider going solar.

Keeping Your Automated Doors in Compliance

If there’s one constant that comes with doing business, it’s regulation. It doesn’t matter what industry you are in or what country your company operates out of, the one constant is an ever-changing landscape of legal obligations that are designed to protect workers and customers, even if they aren’t always clear about how they do it. While some regulations are confusing or hard to apply, others are very clear about ensuring the safety of everybody involved, like the OSHA regulations about hazardous materials. If your business has automated doors or other property features that operate without human oversight, you need to be sure you’re staying in compliance with local safety codes and laws, not just to protect your customers, but also to protect your business.

Reduce Liability, Improve Safety

Most of the time revolving door code compliance is about making sure the machines that operate your automatic doors are properly maintained. By being sure they are in operating order and checking failsafe mechanisms regularly, you protect the people who rely on those features of your property while also staying in bounds with the law. If you’re not sure about how to make those safety checks, that’s okay. Working with a consulting company that specializes in compliance can help. You can also rely on the people who install and repair those features near you, which makes it easy to outsource the tough part of the job.

This is important because liability for accidents is often linked to negligence. When you show you are doing the work to diligently maintain systems, it helps demonstrate you are doing as much as you can to avert mishaps. That can be used to demonstrate due diligence with regard to safety and to defend against accusations of negligence if there is an incident. More importantly, though, it makes those incidents less likely.

How Long Since Your Last Inspection?

If you haven’t had your automated door systems checked out recently, now is the time to bring your business back into compliance with local codes. You might not be past due for that inspection yet, but if you can’t remember when the last one was or how often you need them, it’s better to be safe than sorry. A fast safety check can reveal maintenance needs that have slipped past your team, and a regular schedule for tune-ups and inspections is a great way to make sure your company is always in compliance if an official inspection pops up.

2 Often Overlooked Electrical Problems

For many people, homes provide solitude. People love the space, memories and love that’s shared in their four walls and can’t imagine being anywhere else. However, while a home is extremely valuable, it’s also a lot of work to maintain. From painting to renovating to up-keeping the yard, maintenance is key to its longevity. Another area that’s sometimes overlooked in terms of proper maintenance is the homeowner’s electrical systems. This is a very important aspect in a home, and it’s common for problems that may need to be addressed such as electrical rewiring Philadelphia to end up getting ignored because everything seems to be working. Small glitches may lead to big problems, though. Here are two issues to be on the lookout for. 

1. Something smells like it’s burning. 

In all instances, burning is bad. However, burning food can be addressed. Burning electrical wires, though, need to be fixed immediately! If you ever smell something burning, try and figure out where the smell is coming from, unplug the item and call an electrician. It would also be safe to have an easy exit plan and watch the outlet to see if a fire or smoke starts rising. If this happens, call the fire department just to make sure the flames don’t spread and the fire is eliminated. 

2. Your gas lines aren’t properly grounded. 

Gas lines supply gas throughout your home, and ensuring the lines are tight when they’re put in is very important. If a gas line isn’t secured properly, blowouts can occur if lightning strikes near your property. If you’re unsure if your lines are tightened properly, have an electrical professional come check out your home. It’s better to have peace of mind rather than ignoring something that could turn into a much bigger problem. 

They say home is where the heart is, and keeping your home protected will ensure your heart will be around for many years to come. 

Common Home Electrical Issues You Need to Know About

Electrical fires in the United States cause over $1 billion worth of damage annually. As a homeowner, you need to make sure that your electrical system is working like a well-oiled machine. The older your home and its electrical system get, the harder it will be to avoid problems.

When faced with an electrical repair issue, your first call needs to be to an experienced electrician. These professionals can help you diagnose what is going on and get it fixed in a timely manner. Below are some of the most common home electrical problems and how to address them.

Electrical Surges are Pretty Common

While you can put a number of safeguards in place, you can’t hide from Mother Nature. When severe storms accompanied by lighting move into your area, it can be difficult to keep your electrical system functional. If lighting strikes a power line or the power line is damaged by high winds, you will have to deal with power surges. These surges usually last a few seconds but can do a lot of damage in this short amount of time.

Electronic devices that are not plugged into surge protectors can get damaged. If you are unsure about how to put safeguards in place to protect against these surges, you need to contact an electrical contractor Philadelphia. With their help, you can protect the expensive electronics in your home.

Dealing With Circuit Breaker Problems

Your home’s electrical system has a number of different components. One of the most important components this system has is the circuit breaker box. This box is where all of the electrical wires in your home are placed. Each of these wires is connected to a circuit breaker. When a power surge occurs, these breakers are designed to cut power to the affected area.

If your breakers are constantly tripping, you need to figure out why. This problem can be caused by things like a bad breaker or faulty wiring. Trying to track down the cause of this problem by yourself is a bad idea. Unless you have previous experience with electrical repair, you will struggle to get this work done. This is why hiring an experienced electrician to diagnose and fix this problem is so important.

Before hiring an electrician to help you out, assess the experience and reputation they have. With a quick online search, you should be able to find all of the information you need about a contractor.

Making Your Home Greener

Our homes are a great place to start if we are trying to establish a more sustainable existence. Through small changes that are easily integrated into our lives, we can reduce our environmental impact. We can create a world where our children can have the future they deserve.

Reduce Your Energy Use

If you are constructing a space, consider using a contractor who is known for creating energy efficient homes PA. While construction projects can often lead to a great deal of waste and impact on the environment, by choosing a green path during the building phase, you can make a huge difference in your sustainability practices. It can all begin from the ground up.  

Reduce Your Food Waste

There are many homes where family portion sizes massive and when they’re too large you can find yourself with leftovers. When discarded because you forget or due to an abundance of food, this can have a major impact on the environment. Addressing food waste at home is an easy way to reduce your environmental effects. Consider being more mindful of portions and only buying food for the meals you will eat. If you reduce your food waste, you can have a major influence on your environmental impact.

Reduce Your Plastic Use

Plastics and one-time use items plague our world. These disposable items not only are inefficient, but they are also wasteful and most often end up in landfills. By making a concerted effort to reduce your use of plastics and one-time use items, such as water bottles, plastic bags, coffee cups and dining supplies, you can begin to go greener.

Through small changes in our behavior and a concerted effort to changing how we treat our planet and its resources, we can support its future. Don’t leave future generations to clean up our mess and do your part now.

Making Your Facility Energy Efficient

Regular maintenance to your building will keep your company running efficiently. However, making repairs that are energy efficient will help the environment and cut your utility costs. Here are a few things you can do to improve your building.

Doors and Windows

Check your automatic doors to make sure that the heavy duty spring loaded hinges are functioning properly. These keep the doors shut preventing cold air from getting inside your building which will conserve energy. Inspect the insulation around these and the windows for wear. Add extra caulk to seal any cracks that might have formed to reduce the energy from escaping the structure. 


Consider changing out switches for sensors in your lighting fixtures. These will control the light you use and only allow it on when someone is in the building. Install a timer to shut down only a few lamps for security purposes when the building is vacant. Install LED lighting for the best lighting and efficiency. While these initial costs for these might be more, the cut to your utility bill will be worth it in the end. You can do this within your facility as well as the security lamps and street lights in your parking lot.

Temperature Control

Set up a digital thermostat within the office space of your building. Program it to lower the temperature in the winter and raise it in the summer when the space is vacated. Regularly maintain your furnace or boiler to prevent shut down and to regulate the energy it uses. Look at the insulation that is already installed in the facility and determine if more should be added to trap the air within the structure. Consult with your maintenance supervisor to see which areas might be the most susceptible to let energy escape and find out how much it will cost to reinforce these spots. 

Review Your Costs

Bring an expert in to look over your facility and find what might be using the most energy. Watch your utility bills for any increases or decreases in the costs and where the change might be. Consider the opinions offered by the person hired to complete your audit and determine the amount of money it will take to implement the measures they suggest. Write out a timeline when these improvements can take place, then budget for the repairs to be done. Monitor your energy costs for the savings that will come as each job is accomplished. 

3 Things To Know About Plastic Welding

Since plastic is a large part of modern life, the techniques and processes used to make those items are of great interest such as extrusion molding and plastic welding. In general, extrusion molding is used to make many of the smaller or single piece plastics available to the general public while plastic welding is used to fuse together semi-finished plastics into larger or more complex items.

Who Uses It?

Plastic welding is used to manufacture items used to make other products such as plating tanks or in industrial processes like ducting and drip pans. It is common to outsource your plastic welding needs to companies and individuals who have the skills and tools to make the things that you need. For instance, it is a lot easier for metal plating companies to source their tanks from a specialty company than to set up an area dedicated to making them, buy the equipment and hire welders.

What Is It?

The welding of plastic is like the welding of metals in that it uses softened materials to fuse together pieces in an air-tight seam. This allows the product in question, from tanks to boats, to not leak and is incredibly important when working with hazardous materials. There are two types of welding techniques which can be used, applied heat and solvents. Solvents are more often used in plastics and applied heat is more often used in metals, but the method used depends on the properties of the materials and the specifications of the finished product.

How Is It Done?

Welding, in general, requires the right location, it needs to be done in a well-ventilated area with access to everything you need to clean and weld the surfaces. Safety equipment for plastic welding includes heat or solvent resistant gloves and clothing, a mask to filter dust and fumes and eye protection. Since plastic does not require the same amount of heat that metal does to melt, you only need a soldering iron instead of a welding torch, and your eye protection does not need to filter harmful light. Once the items are cleaned and held in place, heat or solvent is applied to both the seam and to the rod of material used to fill any gaps and the weld is made.

Plastic welding can be done on an individual basis at home to repair products or on an industrial scale to make items like plating and storage tanks, drip pans and ducting. Many manufacturers will get their plastic items from a welding company to make their lines run more smoothly and even work with these businesses for custom items.

5 Tips for Cleaning Up After a Storm

Spring is almost here, and while that means warmer weather and outdoor activities for many people, it also means potentially dangerous thunderstorms.

Storms can wreak havoc on your property, and it is important to clean up the damage in a timely manner. However, if your property has been hit hard, it can be difficult to know where to begin. Here are some helpful hints for handling the herculean task of cleaning up after a storm.

1. Repair Broken Windows

Broken tree branches and flying debris can hit your windows and cause them to shatter. Your first task is to clean up the broken glass so that no one gets hurt. Ultimately, a broken window will probably require glass repair Irving TX. In the interim, however, you can board them up to protect your home until you are able to arrange the repair.

2. Extract Water

Strong storms can sometimes result in flash flooding. If this occurs, water can collect in your basement. A regular old mop and bucket may be sufficient to handle this job, or you may require a wet vac. Drains may become covered with debris, so make sure you clear this away. This should be one of your first priorities because of the potential for mold growth.

3. Check the Roof

It is very important to inspect your roof for any damage, such as lost or broken shingles. If discovered, these problems should be fixed as soon as possible or they can allow water into your house, which can cause even more damage that can be even harder to mitigate.

3. Inspect the Interior

In addition to checking the roof, you should also look carefully at walls and ceilings inside of your home for discoloration or any other signs of water damage. If found, you should check for the source of the leak and try to have it repaired as soon as possible while also taking steps to mitigate mold growth.

4. Remove Wet Drywall and Insulation

These are porous materials that absorb water. Because they are behind the wall, it is unlikely that they will dry out on their own. Your best bet is to remove them entirely and have them replaced.

5. Clean Up Your Yard

If the damage is minor, this may be a relatively simple matter of raking up leaves and clearing away small branches. However, if you have trees that have sustained major damage, you should consult with a tree expert about whether the tree needs to be removed entirely or it can be saved.

Though not a clean-up task per se, it can be helpful to take pictures of the damage for the benefit of your insurance company.

Why Invest in a Water Softener?

Many homes across the country are plumbed with hard water. This means the water flowing through the pipes and into appliances and the kitchen sink is full of minerals and metals. Homeowners often find that hard water is, well, hard on the household. If you live in an area where the water is hard, and you probably do, you may already realize just how hard.

Financial Savings

Appliances are expensive and hard water leaves a lot of scale and other buildup that wears down the components of the washing machine and dishwasher. Treating your water with softeners prevents a lot of wear and tear, so appliances last longer. Naturally, those benefits apply to the plumbing in your home as well. Water softening systems reduce the risk of mineral deposits and scale, reducing the occurrence of corrosion, and preventing the need for expensive repairs.

Warmer Showers

If you rely on a water heater for hot water and you’ve had to wait for hard water to get warm, you’ll soon find that softened water heats up more quickly. In addition to making your mornings nicer, this benefit is great for your electric or gas bill, as well, because the heater won’t need to run as long. It also means lower maintenance and repair costs as the heater’s motor and elements won’t have to work as hard for your shower.

Softer Clothes

Finally, hard water deposits aren’t nice to clothing, dishes, your skin, and your hair. When you have fox valley plumbing technicians add a water softener to your home’s water system, clothes are softer, your dishes are streak-free, and your skin and hair feel cleaner. You can decrease the amount of soap and detergent in your washing appliances and worry less about the presence of soap scum in the bathroom.

You don’t need to put up with stiff clothing from the laundry, mineral deposits on your glassware after running through the dishwasher, a significant investment in fabric softeners, appliance repair costs, and that scale buildup around the faucets. Most of these drawbacks can be overcome when you have a water softener installed.

Salzgitter – City of Steel, Mobility and Logistics

The city Salzgitter is located in southeastern Lower Saxony north of the Harz and south of the Lüneburg Heath. It was founded in 1942 by founding act and still exists today from 31 z.T. relatively distant districts. The urban area covers 224 square kilometers and has a north-south extension of 22 kilometers and an east-west extension of 19 kilometers.

House line in the Ostsiedlung,

Salzgitter bath

Their development and naming is closely related to historical salt finds, but also to the ore deposits that formed the basis for the development of the city of Salzgitter during the Nazi era.

Under the special political circumstances of the 1930s and the associated ideological ideas, the raw material area at that time in the middle of Germany offered ideal conditions for founding a city under the banner of industrial iron ore mining and processing. The Reichswerke «Hermann Göring» were founded in 1937, at that time Salzgitter counted 19,500 inhabitants. An industrial center with 250,000 people was planned. In 1939, Salzgitter already had 46,000 inhabitants, and by 1950 the population had increased to 100,000.

Although iron ore is no longer extracted in Salzgitter, foreign ore is still smelted and processed into steel products. With approx. 50,000 employees, Salzgitter is the third largest industrial location in Lower Saxony and has numerous globally operating companies. Despite its importance as a business location, the city has already suffered population losses in recent years, alone 6.5% between 1995 and 2003. For the future, a continuing loss of population is expected, which by 2015, the city now has about 110,000 inhabitants on a population of 96,800 will reduce *.

The problems due to persistent population losses are concentrated, as in other pilot cities, in the settlements where rental housing with only suboptimal living standards is offered. In the neighborhoods of Gebhardshagen and Bad, the focus is on housing stocks from the 1930s, and in Lebenstedt those dating back to the 1960s. Individual residential areas have vacancy rates of up to 20%, in some residential buildings up to 60% of the apartments are empty.

In the urban redevelopment process, Salzgitter is facing the challenge of carrying out a city-compatible market adjustment of rental housing stocks in several housing estates from the 1930s and 1960s while at the same time adapting remaining housing offers to today’s residential requirements. Particular attention will have to be given to how the continued demand for homes can be taken into account in the restructuring of housing estates.

Page 2 of 2

Powered by WordPress & Theme by Anders Norén